Azure IoT Hub message routing

Question

I want to setup mutiple devices in single blob storage container using iot hub message routing, please help

Vikas Singh · Answer

@Suresh, You can achieve this by partitioning like below- Go to message routing and add route then you will get below screen- {iothub}/{plantname}/{devicename}/{YYYY}/{MM}/{DD}/{HH}/{mm}

Abhishek Chadha · Answer

Setting up multiple devices in a single blob storage container using Azure IoT Hub message routing involves several steps. Below is a high-level guide to achieve this: 1. Set up Azure IoT Hub: - Create an Azure IoT Hub instance in the Azure portal. - Register your IoT devices with the IoT Hub. Each device should have a unique identifier. 2. Set up Blob Storage: - Create a blob storage account in the Azure portal. - Create a blob container within the storage account where you want to store the data from your IoT devices. 3. Set up IoT Hub Message Routing: - Navigate to your Azure IoT Hub instance in the Azure portal. - Go to the "Message routing" section under "Messaging". - Create a new route. - Define the query for the route to filter messages from the desired devices. For example, you can filter messages based on device properties like device ID or device type. - Set the endpoint of the route to your blob storage container. 4. Configure IoT Devices: - Configure your IoT devices to send telemetry data to the IoT Hub. - Ensure that each device sends data with appropriate device identifiers that match the routing query. 5. Test: - Send some test data from your IoT devices to the IoT Hub. - Verify that the data is routed to the correct blob storage container based on your routing rules. 6. Monitoring and Maintenance: - Regularly monitor your IoT Hub and blob storage for incoming data and storage usage. - Adjust your routing rules as needed based on changes in device configurations or data requirements. By following these steps, you can set up multiple devices to send data to a single blob storage container using Azure IoT Hub message routing.

Tuhin Paul · Answer

You can route messages from multiple devices to a single blob storage container. You can create a storage endpoint using following steps: Access your Azure IoT Hub through the Azure portal. Navigate to the "Message routing" section under "Hub settings." Click on "Add" to create a new endpoint. In the "Endpoint type" selection, choose "Storage." Provide a unique name for this endpoint (e.g., "multi-device-storage"). Keep the remaining parameters with their defaults and click "Create + next."

Tuhin Paul · Answer

Azure IoT Hub message routing allows you to efficiently distribute telemetry data from various devices to designated Azure services.